| Engine | Four-Stroke, Twin-Cylinder, DOHC, 8-Valve, Liquid-Cooled |
|---|---|
| Displacement | 947 cm³ |
| Bore x Stroke | 92.5 mm x 70.4 mm |
| Compression ratio | 13.5:1 with High-Compression |
| Exhaust | Stainless Steel 2-1, 105 dB GP Pipe |
| Fuel System | Dell'Orto 46mm Throttle Body |
| Ignition | Mectronik MKE8 ECU with Ride-by-Wire and Inertial Measurement Unit (IMU) |
| Dash | ADU- 5 ECU Master |
| Electronics | Adjustable Traction Control, Adjustable Wheelie Control, Pitlane Speed Limiter |
| E-Start | Standard |
| Mapping | Adjustable Engine Braking and Throttle Maps |
| Transmission | 6-Speed |
| Clutch | PASC Slipper Clutch, Cable Actuated |
| Frame Type | Chromoly (25CrMo4) Steel-Trellis Frame, Powder Coated Red |
| Power | 135hp @ 10,000 rpm |
| Torque | 105 Nm @ 7,000 rpm |
| Seat Height | Adjustable |
| Curb Weight | 317 lbs / 144 kg |
| Fuel Capacity | 16 Liters (4.2 US Gallons) |
| Triple Clamps | CNC-machined, 26mm or 28mm Adjustable Offset Triple Clamps |
| Steering Damper | Standard, Hyper Pro RCS |
| Final Drive | DID ERV 520 Racing X-Ring Chain |
| Front Suspension | WP Apex Pro 7543, Closed-Cartridge, Fully Adjustable, Split-Function Damping with Krämer Shim Stack |
| Rear Suspension | WP Apex Pro 7746, Fully Adjustable, High & Low-Speed Compression, Remote Preload, Ride-Height, with Progressive Linkage |
| Suspension Travel | 120mm (Front) / 140mm (Rear) |
| Front Brakes | Dual 290mmx5.0mm fully floating rotors with Brembo Stylema Calipers |
| Rear Brakes | Single 230mm Full-Floating Rotor with Brembo P2 Caliper |
| Front Wheel | Forged Aluminum Dymag UP7X 3.5″ x 17″ |
| Rear Wheel | Forged Aluminum Dymag UP7X 6″ x 17″ (for Moto America also available in 5.5"x17") |
| Body | Avio Fibre Fairing with Carbon Reinforcement (Painted), XPE Fuel Tank/Seat |
| Handlebars | Aluminium Flat Bar |
| Air Filter | Cleanable Racing Air Filter |
| Quickshifter | Standard, Up/Down Dominio Racing Shifter |
| Crash Pads | Frame, Forks, Fuel Cell, & Brake Lever Guard |
Pre-order
now!
You can simply join the pre-order list by using the form - without obligation and initially without a deposit. We will contact you directly and discuss the next steps with you personally. For information on pricing and specifications, contact us at any time at info@kraemer-motorcycles.com.